# "Pure" Tesla Charge Port Opener Files
[From the creator (fredilarsen)](https://github.com/fredilarsen/TeslaChargeDoorOpener):
I’ve generated "clean" files. The ones available in every repository are RAW recordings.
Those are generated files without the timing jitter or a recording.
Original project was for an Arduino and an ASK STX882 transmitter. These have been converted for the Flipper!
Generated/Created by the original author, also known as [GringoZobel on Discord](https://discord.com/channels/740930220399525928/954422680969445377/1004501487143096451).
Technical details also direct from the creator:
```
Hex:
aaaaaa8acb32cccccb4d2d4ad34cab4b1596659999969a5a95a69956962b2ccb33332d34b52b4d32ad28
Bits:
101010101010101010101010100010101100101100110010110011001100110011001011010011010010
110101001010110100110100110010101011010010110001010110010110011001011001100110011001
100101101001101001011010100101011010011010011001010101101001011000101011001011001100
101100110011001100110010110100110100101101010010101101001101001100101010110100101
```
```
The symbol rate is 2500 bits/second.
// The signal to send
const uint16_t pulseWidth = 400; // Microseconds
const uint16_t messageDistance = 23; // Millis
const uint8_t transmissions = 5; // Number of repeated transmissions
const uint8_t messageLength = 43;
const uint8_t sequence[messageLength] = {
0x02,0xAA,0xAA,0xAA, // Preamble of 26 bits by repeating 1010
0x2B, // Sync byte
0x2C,0xCB,0x33,0x33,0x2D,0x34,0xB5,0x2B,0x4D,0x32,0xAD,0x2C,0x56,0x59,0x96,0x66,
0x66,0x5A,0x69,0x6A,0x56,0x9A,0x65,0x5A,0x58,0xAC,0xB3,0x2C,0xCC,0xCC,0xB4,0xD2,
0xD4,0xAD,0x34,0xCA,0xB4,0xA0};
```
Analysis of old raw/dirty signals for cleaning (playback from Evil Crow):
-----
## Donation Information
Nothing is ever expected for the hoarding of digital files, creations I have made, or the people I may have helped.
## Ordering from Lab401? [USE THIS LINK FOR 5% OFF!](https://lab401.com/r?id=vsmgoc) (Or code `UberGuidoZ` at checkout.)
I've had so many asking for me to add this.
 
**BTC**: `3AWgaL3FxquakP15ZVDxr8q8xVTc5Q75dS`
**BCH**: `17nWCvf2YPMZ3F3H1seX8T149Z9E3BMKXk`
**ETH**: `0x0f0003fCB0bD9355Ad7B124c30b9F3D860D5E191`
**LTC**: `M8Ujk52U27bkm1ksiWUyteL8b3rRQVMke2`
**PayPal**: `uberguidoz@gmail.com`
So, here it is. All donations of *any* size are humbly appreciated.
 
Donations will be used for hardware (and maybe caffeine) to further testing!
