flipper-zero-stuff/sub-ghz/Ceiling_Fans/TX028C-S Remote
2024-08-14 08:52:00 -07:00
..
0000 MORE SHIT 2024-08-14 08:52:00 -07:00
0001 MORE SHIT 2024-08-14 08:52:00 -07:00
0010 MORE SHIT 2024-08-14 08:52:00 -07:00
0011 MORE SHIT 2024-08-14 08:52:00 -07:00
0100 MORE SHIT 2024-08-14 08:52:00 -07:00
0101 MORE SHIT 2024-08-14 08:52:00 -07:00
0110 MORE SHIT 2024-08-14 08:52:00 -07:00
0111 MORE SHIT 2024-08-14 08:52:00 -07:00
1000 MORE SHIT 2024-08-14 08:52:00 -07:00
1001 MORE SHIT 2024-08-14 08:52:00 -07:00
1010 MORE SHIT 2024-08-14 08:52:00 -07:00
1011 MORE SHIT 2024-08-14 08:52:00 -07:00
1100 MORE SHIT 2024-08-14 08:52:00 -07:00
1101 MORE SHIT 2024-08-14 08:52:00 -07:00
1110 MORE SHIT 2024-08-14 08:52:00 -07:00
1111 MORE SHIT 2024-08-14 08:52:00 -07:00
.remote.png MORE SHIT 2024-08-14 08:52:00 -07:00
dip_switch_byte.txt MORE SHIT 2024-08-14 08:52:00 -07:00
README.md MORE SHIT 2024-08-14 08:52:00 -07:00

TX028C-S Fan Remote

FCC Link: https://fcc.report/FCC-ID/A25-TX028

Copied from a fan from Home Depot ( Link ):

Home Decorators Collection - Ashby Park 52 in. White Color Changing Integrated LED Brushed Nickel Ceiling Fan with Light Kit and Remote Control

It is used with more than that one fan, but this is the product that it came with when these codes were copied.

There are 4 DIP switches inside the battery cover, so the different codes correspond to the positions of those switches

The light_color_temp_toggle.sub files toggle the light between the different color temperatures.

The light dimming button is a bit weird to use. On the remote, you hold the button and it continuously sends a signal. Using the same code read with the flipper requires you to continuously tap the button to keep the dimming ramping up and down. About 3 seconds of raw capture was performed for code 1111, allowing a single button press for a decent range of dimming, but this was not done for other codes due to the time involved.