flipper-zero-stuff/sub-ghz/Restaurant_Pagers/SubGHz_changes.md

https://github.com/flipperdevices/flipperzero-firmware/tree/dev/firmware/targets/f7/furi_hal/furi_hal_subghz.c

Change furi_hal_subghz_is_frequency_valid and furi_hal_subghz_set_frequency_and_path

Reminder, the unofficially supported freq are 281-361 MHz, 378-481 MHz, and 749-962 MHz

281000000 - 361000000
378000000 - 481000000
749000000 - 962000000

bool furi_hal_subghz_is_frequency_valid(uint32_t value) {
    if(!(value >= 281000000 && value <= 361000000) &&
       !(value >= 378000000 && value <= 481000000) &&
       !(value >= 749000000 && value <= 962000000)) {
        return false;

uint32_t furi_hal_subghz_set_frequency_and_path(uint32_t value) {
    value = furi_hal_subghz_set_frequency(value);
    if(value >= 281000000 && value <= 361000000) {
        furi_hal_subghz_set_path(FuriHalSubGhzPath315);
    } else if(value >= 378000000 && value <= 481000000) {
        furi_hal_subghz_set_path(FuriHalSubGhzPath433);
    } else if(value >= 749000000 && value <= 962000000) {
        furi_hal_subghz_set_path(FuriHalSubGhzPath868);
    } else {
        furi_crash("SubGhz: Incorrect frequency during set.");
    }
    return value;

Don't forget to add your new freq to the user settings file.

---

I've had so many asking for me to add this.

BTC: 3AWgaL3FxquakP15ZVDxr8q8xVTc5Q75dS
BCH: 17nWCvf2YPMZ3F3H1seX8T149Z9E3BMKXk
ETH: 0x0f0003fCB0bD9355Ad7B124c30b9F3D860D5E191
LTC: M8Ujk52U27bkm1ksiWUyteL8b3rRQVMke2

So, here it is. All donations of any size are humbly appreciated.

Donations will be used for hardware (and maybe caffeine) to further testing!